6) Remove the coupling shaft t and the E-ring y; then, remove the pulley cover u.7) Remove the two screws i and the cable fixing plate o; then, remove the lifter cable!0 on the outside.8) Remove the two screws !1 and the cable fixing plate !2; then, remove the lifter cable!3 on the inside.• To detach the lifter cable !3 on the inside from the pulley !4 on the inside, removethe two set screws !6 on the pulley !5 on the outside, and remove the pulley inadvance.Figure 8-408tyu!6 !0 !3!1!2!5!4oiCOPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 8 PAPER DECK-A18-39Download service manual and resetter printer at http://printer1.blogspot.com
