Canon PIXMA MP830 User Manual

Also see for PIXMA MP830: Supplementary guide Start here User guide Quick start guide Service manual

Cause ActionThe name of the machine being usedis not selected in the [Printer} pull-down menu of the [Print} dialog box.Select [MP830} from the [Printer} pop-up menu in the [Print} dialog box ofthe printer driver.If [MP830} is not displayed in the printer list, follow the procedure below toconfirm the settings.1. Select [Print & Fax Preferences] from the [Printer} pop-up menu.2. Check that [MP830] is displayed in the screen that is displayed andselect the [In Menu] check box.When you are using Mac OS X v.10.3.x or Mac OS X v.10.2.x, select [EditPrinter List] from the [Printer] pop-up menu and ensure that [MP830] isdisplayed in the [Printer List} and select the check box.3. If [MP830] is not displayed, click [+] to add a printer.If [MP830] is not displayed, install the MP Drivers again referring to theEasy Setup Instructions for the operation.• Error No.: 1700 is DisplayedCause ActionThe waste ink absorber is almostfull.Ink used for cleaning is absorbed in a waste ink absorber placed in themachine.Press [OK} to cancel the error so that you can continue printing. Once thewaste ink absorber becomes completely full, printing cannot be done untilthe waste ink absorber is replaced.Canon recommends to contact the Canon Customer Care Center as soonas possible.M• Error No.: 1851 is DisplayedCause ActionInner Cover is open when startingregular printing.Close Inner Cover, then press [OK} on the machine.• Error No.: 1856 is DisplayedCause ActionDuring regular printing, Inner Coveris opened.Close Inner Cover, press [OK} on the machine, then try printing again.One page of the print data being sent at the time of the error will beerased, so print that page again.194 Troubleshooting Chapter 11Cause ActionThe name of the machine being usedis not selected in the [Printer} pull-down menu of the [Print} dialog box.Select [MP830} from the [Printer} pop-up menu in the [Print} dialog box ofthe printer driver.If [MP830} is not displayed in the printer list, follow the procedure below toconfirm the settings.1. Select [Print & Fax Preferences] from the [Printer} pop-up menu.2. Check that [MP830] is displayed in the screen that is displayed andselect the [In Menu] check box.When you are using Mac OS X v.10.3.x or Mac OS X v.10.2.x, select [EditPrinter List] from the [Printer] pop-up menu and ensure that [MP830] isdisplayed in the [Printer List} and select the check box.3. If [MP830] is not displayed, click [+] to add a printer.If [MP830] is not displayed, install the MP Drivers again referring to theEasy Setup Instructions for the operation.• Error No.: 1700 is DisplayedCause ActionThe waste ink absorber is almostfull.Ink used for cleaning is absorbed in a waste ink absorber placed in themachine.Press [OK} to cancel the error so that you can continue printing. Once thewaste ink absorber becomes completely full, printing cannot be done untilthe waste ink absorber is replaced.Canon recommends to contact the Canon Customer Care Center as soonas possible.M• Error No.: 1851 is DisplayedCause ActionInner Cover is open when startingregular printing.Close Inner Cover, then press [OK} on the machine.• Error No.: 1856 is DisplayedCause ActionDuring regular printing, Inner Coveris opened.Close Inner Cover, press [OK} on the machine, then try printing again.One page of the print data being sent at the time of the error will beerased, so print that page again.194 Troubleshooting Chapter 11