Canon PIXMA MP830 User Manual

Also see for PIXMA MP830: Supplementary guide Start here User guide Quick start guide Service manual

Turning the Machine ON and OFFTurn on the machine before starting printing.• Turning on the MachineBefore turning on the machine, confirm that the Print Head and ink tanks are set into place.~ NoteIf preparatory operations above are not yet finished, follow the Easy Setup Instructions tocomplete them.1 Press [ON/OFF].[COPY] flashes green for a while, and then turns on.~ NoteIf the Alarm Lamp lights or flashes orange and an error message is displayed on the LCD. see"An Error Message is Displayed on the LCD" on page 161.• Turning off the Machine1 To turn off the machine, press [ON/OFF].The machine is off when the currently selected Mode button (e.g. COpy) stops flashing andall Operation Panel lamps are off.~ ImportantWhen removing the power plug after turning off the machine, be sure to check that all thelamps on the Operation Panel are not lit. If the power plug is removed from the wall outlet withthe lamps on the Operation Panel lit or blinking, the machine cannot protect its Print Head andmay be unable to print.See "Keeping the Best Printing Results" on page 147.~ NoteThe power cannot be turned OFF while the machine is sending or receiving a fax, or whenthere are unsent faxes stored in the machine's memory.18 Before Printing Chapter 1Turning the Machine ON and OFFTurn on the machine before starting printing.• Turning on the MachineBefore turning on the machine, confirm that the Print Head and ink tanks are set into place.~ NoteIf preparatory operations above are not yet finished, follow the Easy Setup Instructions tocomplete them.1 Press [ON/OFF].[COPY] flashes green for a while, and then turns on.~ NoteIf the Alarm Lamp lights or flashes orange and an error message is displayed on the LCD. see"An Error Message is Displayed on the LCD" on page 161.• Turning off the Machine1 To turn off the machine, press [ON/OFF].The machine is off when the currently selected Mode button (e.g. COpy) stops flashing andall Operation Panel lamps are off.~ ImportantWhen removing the power plug after turning off the machine, be sure to check that all thelamps on the Operation Panel are not lit. If the power plug is removed from the wall outlet withthe lamps on the Operation Panel lit or blinking, the machine cannot protect its Print Head andmay be unable to print.See "Keeping the Best Printing Results" on page 147.~ NoteThe power cannot be turned OFF while the machine is sending or receiving a fax, or whenthere are unsent faxes stored in the machine's memory.18 Before Printing Chapter 1