NetWare Print Service Settings 4-54Using a NetWare Network (Windows)Setup Using NetWare Administrator or PCONSOLEUsing NetWare Administrator in the NDS Queue Server Mode or theRemote Printer Mode (NetWare 4.x or Later)1 Log in to NetWare as Administrator (or equivalent access) ➞start NetWare Administrator.2 Execute Quick Setup.❑ Select the container object for the printer object you want to create ➞ click[Print Services Quick Setup] on the [Tools] menu.3 Specify the [Print Server name], [Printer], and [Print Queue]settings.❑ Enter the print server name in [Print Server name].To use an existing print server, click the button to the right of [Print Servername] ➞ select a print server from the list box.❑ Under [Printer], enter the printer name in [Name].❑ From [Type], select the printer connection method.If you are using the queue server mode, select [Other/Unknown] from [Type].If you are using the remote printer mode, select [Parallel] from [Type] ➞ click[Communication] to open the [Parallel Communication] dialog box ➞ select[LPT1] from [Port], and [Manual load] under [Connection type]. Under[Interrupts], specify the appropriate setting for your environment ➞ click [OK]to close the [Parallel Communication] window.❑ Under [Print Queue], enter the queue name in [Name]. In [Volume], enter thevolume in which the queue is placed.To use an existing print server, click the button to the right of [Volume] ➞ selecta print server from the list box.❑ Click [Create] ➞ exit NetWare Administrator.NOTEBe sure to remember the name of the print server. You need it to specify themachine's protocol settings.
