Protocol Settings 4-94Using a NetWare Network (Windows)Protocol SettingsYou can specify the protocol settings for the machine by using any of the following:• The machine's control panel• The Remote UI (via a web browser)• NetSpot Device Installer (Canon utility)IMPORTANT• To configure settings with software other than the control panel of the machine orNetSpot Device Installer, TCP/IP protocol must be supported by your networkenvironment.• Some items cannot be set using the Remote UI or NetSpot Device Installer. For detailsabout items that can be set with the Remote UI or NetSpot Device Installer, see "NetworkSetting Items," on p. 9-2.• The following procedure describes sample settings using the control panel.NOTE• For instructions on how to enter settings using the Remote UI, see Chapter 3,"Customizing Settings," in the Remote UI Guide.• For more information on NetSpot Device Installer, see Chapter 7, "Using Utilities to MakeNetwork and Device Settings."Settings from the Control PanelThe procedure for specifying the settings from the control panel is as follows.IMPORTANTSettings made from the control panel become effective when the machine is restartedafter the procedure.NOTEFor instructions on how to enter characters using the touch panel display, see Chapter 2,"Basic Operations," in the Reference Guide.1 Press (Additional Functions).
