Canon imageRunner 6570 Network Manual

Also see for imageRUNNER 5570: Media guide Driver guide Reference guide Specification Service guide

Contents

Interface Settings 2-112Settings Common to the Network ProtocolsIMPORTANTIf you reconnect the network cable (for example, reconnect the cable to a differentEthernet hub) with the power ON, the Auto Detect function will not work even if youset to [On]. (Connect the cable with the power OFF.)NOTEThe default setting is 'On.' Use the [Off] setting when you want to specify aparticular Ethernet setting.8 Specify on the Ethernet DriverSettings screen.● If you want to alternately send and receive:❑ Press [Half Duplex].● If you want to simultaneously send and receive:❑ Press [Full Duplex].9 Specify on the Ethernet Driver Settingsscreen.● If you want to establish a 10Base-T network connection:❑ Press [10 Base-T].● If you want to establish a 100Base-TX network connection:❑ Press [100 Base-TX].10 Confirm the settings you specified ➞ press [OK].The display returns to the Network Settings screen.11 Press [Done] repeatedly until the Additional Functions screencloses.12 Restart the machine.❑ Turn OFF the machine, wait at least 10 seconds, and then turn it ON.