Protocol Settings 3-273Using a TCP/IP Network❑ Enter an IP address that exists on the network using - (numeric keys) ➞press [Start].When you press [Start], the result of the PING command appears on the touchpanel display.If this result is inappropriate, check the settings described in "InterfaceSettings," on p. 2-7, and "TCP/IP Settings," on p. 3-4.IMPORTANT• If you set the startup time of the machine's network function by following theprocedure in "Startup Time Settings," on p. 3-50, execute the PING command onlyafter the time set as the startup time passes (the default setting startup time is '60seconds').• If you connect the machine to a switching hub, the machine may not be able toconnect to a network even though your network settings are appropriate. Thisproblem may be resolved by delaying the startup of network communications forthe machine. See "Startup Time Settings," on p. 3-50 for information on how to setup the startup time.❑ Press [Done] ➞ press [▼] or [▲] until [SNTP Settings] appears ➞ press [SNTPSettings].❑ Press [NTP Server Check]. is displayed if time synchronization is working correctly via SNTP.NOTE• If is displayed, check the settings for [NTP Server Address] set in step 15.• Even if you perform [NTP Server Check], time settings are not updated. Check thatcommunications are possible between the machine and the NTP server.28 Press [Done] repeatedly until the Additional Functions screencloses.
