NetWare Print Service Settings4-64Using a NetWare Network (Windows)4 If you are using the remote printer mode, start the print server.❑ If you are using the NetWare file server as a print server, enter PSERVER.NLM> in the file server ➞ press [ENTER] on the keyboard.NOTEIf you are using the queue server mode, this step is not required.NetWare print service settings are complete. Proceed to "Protocol Settings," on p. 4-9.Using PCONSOLE in the Queue Server Mode or Remote Printer Modein the Bindery Mode (NetWare 3.2)1 Log in to NetWare as Supervisor, and then start PCONSOLE.2 If you have not set up a print server yet, set up the printserver.❑ On the [Available Options] menu, select [Print Server Information] ➞ press[ENTER] on the keyboard.❑ Press [INSERT] on the keyboard.❑ Enter the name of the print server you are setting up ➞ press [ENTER] on thekeyboard.❑ Press [ESC] on the keyboard to return to the [Available Options] menu.NOTEBe sure to remember the name of the print server. You need it to specify theprinter's protocol settings.3 Set up a Queue, and then assign the print server to the queue.❑ On the [Available Options] menu, select [Print Queue Information] ➞ press[ENTER] on the keyboard.❑ Press [INSERT] on the keyboard.❑ Enter the name of the queue you are setting up ➞ press [ENTER] on thekeyboard.❑ Select the name of the queue you specified ➞ press [ENTER] on the keyboard.❑ Select [Queue Servers] ➞ press [ENTER] on the keyboard.❑ Press [INSERT] on the keyboard.
