Protocol Settings 5-35Using a NetBIOS NetworkProtocol SettingsYou can specify the protocol settings for the machine by using any of the following:• The machine's control panel• The Remote UI (via a web browser)IMPORTANT• If you are configuring the TCP/IP settings for the first time, use the control panel of thismachine. After configuring the settings, you can change the content by using the RemoteUI.• Some items cannot be set using the Remote UI. For details about items that can be setwith the Remote UI, see "Network Setting Items," on p. 9-2.NOTEFor instructions on how to enter settings using the Remote UI, see Chapter 3,"Customizing Settings," in the Remote UI Guide.Settings from the Control PanelThe procedures for specifying the settings from the control panel are as follows.IMPORTANTSettings specified from the control panel become effective after the machine is restarted,after the procedure.NOTEFor instructions on how to enter characters using the touch panel display, see Chapter 2,"Basic Operations," in the Reference Guide.TCP/IP Settings1 Specify the TCP/IP settings.If you have not entered the TCP/IP settings yet, enter them now. (For moreinformation, see "TCP/IP Settings," on p. 3-4.)Next, specify the SMB and WINS settings.
