1-328. Using the Setup ScreenThe mode’s Setup screen shows the current status of mode settings and lets you make anychanges you want. The following procedure shows how to change a setup.u To change a mode setup1. Select the icon you want and press w to enter a mode and display its initial screen. Herewe will enter the Run-Matrix mode.2. Press !m(SET UP) to display the mode’s Setupscreen.• This Setup screen is just one possible example. ActualSetup screen contents will differ according to the modeyou are in and that mode’s current settings.3. Use the f and c cursor keys to move the highlighting to the item whose setting youwant to change.4. Press the function key (1 to 6) that is marked with the setting you want to make.5. After you are finished making any changes you want, press J to exit the Setup screen.k Setup Screen Function Key MenusThis section details the settings you can make using the function keys in the Setup screen.indicates default setting.• The setting of each item with a frame around it is indicated by an icon in the status bar.u Input/Output (input/output mode)• {Math } / { Line } ... {Math}/{Linear} input/output modeu Mode (calculation/binary, octal, decimal, hexadecimal mode)• {Comp} ... {arithmetic calculation mode}• {Dec } / { Hex} / { Bin } / { Oct } ... {decimal}/{hexadecimal}/{binary}/{octal}u Frac Result (fraction result display format)• {d/c } / { ab/c } ... {improper}/{mixed} fraction
