14-6k Managing Geometry Mode FilesThis section explains how to save Geometry mode data to files, and how to manage yourfiles.u To create a new file1. Perform the following operation: 1(File) – 1:New.• The following dialog box will appear if you have adrawing on the screen.2. To clear the current drawing and create a new file, press 1(Yes).• This will create a new file and display a blank drawing screen.u To open an existing file1. Perform the following operation: 1(File) – 2:Open.• This displays a menu of existing files.• Pressing 6(STRGMEM) here will display the storage memory file list where you canopen a g3p file. For details, see “Displaying a Geometry Mode Screen BackgroundImage” (page 14-8).2. Use c and f to move the highlighting to the file you want to open and then press w.• The following dialog box will appear if you have adrawing on the screen.3. To clear the current drawing, press 1(Yes).• This will open the file you selected in step 2.
