15-6u Picture Plot Settings Saved to Image Files• Picture Plot settings that can be changed on the Setup screen are divided into two groups:settings that are saved in the image file and settings that are saved by the calculator.Item name Settings saved to theimage fileSettings saved by thecalculatorAxtrans Wind *1Graph Func Plot Color * 1Plot Type * 1Sketch Color * 1Sketch Line * 2Angle Complex Mode Coord Grid * 2Axes * 2Label * 2Display *1 Picture Plot specific setup item*2 Common setting in all modes. If you enter the Picture Plot mode after changing thesesettings in another mode, the setting of the file that was opened the last time you were inthe Picture Plot mode will be recalled.• For V-Window settings, the settings stored with a file will be recalled whenever the file isopened in the Picture Plot mode. This means that if you change V-Window settings inanother mode and then return to the Picture Plot mode, the V-Window settings will revertto the settings for the file that is currently opened in the Picture Plot mode. If you go fromthe Picture Plot mode to another mode, the Picture Plot V-Window settings are retained.Settings do not change in accordance with the mode being entered.u To save a fileWhile the Picture Plot screen is displayed, press K1(FILE)2(SAVE). This will save thefile you are editing by replacing the currently stored version (if any).
