2010080120100801ε-49Graph Analysis Tool Graph Screen Operations8. If you want to retry output from the speaker, press 1(Yes). To exit the procedure andreturn to the graph screen, press 6(No).• Pressing 1(Yes) returns to the “Output Frequency” dialog box. From there, repeat theabove steps from step 4.k Configuring View Window ParametersPressing !3(V-Window) while the graph screen is on the display displays a ViewWindow function key menu along the bottom of the display.Press the function key that corresponds to the View Window parameter you want toconfigure.Function Key Description1(Auto)Automatically applies the following View Window parameters.Y-axis Elements: In accordance with screen sizeX-axis Elements: In accordance with screen size when 1 data itemequals 1 dot; 1 data equals 1 dot in other cases2(FULL) Resizes the graph so all of it fits in the screen.3(Y) Resizes the graph so all of it fits in the screen along the Y-axis,without changing the X-axis dimensions.4(UNIT)Specifies the unit of the numeric axis grid displayed by the Econ Axessetting of the graph setup screen (page ε-17).1(μsec): microseconds2(msec): milliseconds3(Sec): seconds4(DHMS): days, hours, minutes, seconds (1 day, 2 hours, 30minutes, 5 seconds = 1d2h30m5s)5(Auto): Auto selection5(CHANGE) Toggles display of the source data on the graph screen on and off.To exit the View Window function key menu and return to the standard function key menu,press J.
