2010080120100801ε-51Calling E-Con2 Functions from an eActivity3. Use f and c to move the highlighting to the type of Econ strip you want to insert.• See the beginning of this section (page ε-50) fordetails about each Econ strip type.4. Press w.• The strip is inserted above the line or the strip wherethe cursor is currently located.5. Enter up to 16 characters for the strip title.6. Press w to assign the title to the strip.• This will highlight the strip.• You can execute the strip here by pressing w. Fordetails about operations that are required when youexecute a strip, see “Calling an E-Con2 Functionfrom an Econ Strip” below.k Calling an E-Con2 Function from an Econ StripThis section explains operations for each type of Econ strip that can be inserted into aneActivity file. The following procedure assumes that the applicable Econ strip has alreadybeen inserted into an eActivity that is currently open.• To access the Setup Wizard from an Econ SetupWizard strip1. On the eActivity workspace screen, use the fand c keys to move the highlighting to the EconSetupWizard strip.2. Press w.• This launches the Setup Wizard and displays the“Select Sensor” screen.
