15-84. Repeat step 3 as many times as required to plot all of thepoints you want.• Here, you could press K3(EDIT), select a plot, and move it to another location. Fordetails, see “To move a plot” (page 15-9).• You can plot up to 50 points in the case of a g3p file. For a g3b file, you can plot one pointfor each of the images contained in the file.5. After you are finished plotting all of the points you want, press J or !J(QUIT).u To make the pointer jump to a particular locationIn the Plot mode, pressing a number key (b to j) will cause the pointer to jump to thecorresponding section of the screen as shown below.h i je f gb c du Plotting Points in a g3b FileA g3b file is a special Picture Plot file that can contain up to 30 images in a single file.• Opening a g3b file with Picture Plot and plotting a point will switch to the next sequentialimage in the file.→ →• To view the images contained in a g3b file, press K6(g)5(PLAY) and then performone of the playback operations described below.- Press 1(Auto). This sequentially displays all of the images in the file three timesautomatically.- Press 2(Manual). Use d and e to scroll the images in the file.Press J to return to the screen that was displayed before you pressed K6(g)5(PLAY).• g3b files can be opened in the Picture Plot mode only.
