Your identification has been saved in /home/admin/.ssh/id_rsa.Your public key has been saved in /home/admin/.ssh/id_rsa.pub.Configuring Host-Based SSH AuthenticationAuthenticate a particular host. This method uses SSH version 2.To configure host-based authentication, use the following commands.1 Configure RSA Authentication. Refer to Using RSA Authentication of SSH.2 Create shosts by copying the public RSA key to the file shosts in the directory .ssh, and write the IPaddress of the host to the file.cp /etc/ssh/ssh_host_rsa_key.pub /.ssh/shostsRefer to the first example.3 Create a list of IP addresses and usernames that are permitted to SSH in a file called rhosts.Refer to the second example.4 Copy the file shosts and rhosts to the Dell Networking system.5 Disable password authentication and RSA authentication, if configuredCONFIGURATION mode or EXEC Privilege modeno ip ssh password-authentication or no ip ssh rsa-authentication6 Enable host-based authentication.CONFIGURATION modeip ssh hostbased-authentication enable7 Bind shosts and rhosts to host-based authentication.CONFIGURATION modeip ssh pub-key-file flash://filename or ip ssh rhostsfile flash://filenameExamples of Creating shosts and rhostsThe following example shows creating shosts.admin@Unix_client# cd /etc/sshadmin@Unix_client# lsmoduli sshd_config ssh_host_dsa_key.pub ssh_host_key.pubssh_host_rsa_key.pub ssh_config ssh_host_dsa_key ssh_host_keyssh_host_rsa_keyadmin@Unix_client# cat ssh_host_rsa_key.pubssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEA8K7jLZRVfjgHJzUOmXxuIbZx/AyWhVgJDQh39k8v3e8eQvLnHBIsqIL8jVy1QHhUeb7GaDlJVEDAMz30myqQbJgXBBRTWgBpLWwL/doyUXFufjiL9YmoVTkbKcFmxJEMkE3JyHanEi7hg34LChjk9hL1by8cYZP2kYS2lnSyQWk=admin@Unix_client# lsid_rsa id_rsa.pub shostsadmin@Unix_client# cat shosts10.16.127.201, ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEA8K7jLZRVfjgHJzUOmXxuIbZx/AyWhVgJDQh39k8v3e8eQvLnHBIsqIL8jVy1QHhUeb7GaDlJVEDAMz30myqQbJgXBBRTWgBpLWwL/doyUXFufjiL9YmoVTkbKcFmxJEMkE3JyHanEi7hg34LChjk9hL1by8cYZP2kYS2lnSyQWk=Security 1008
