• Save the running-configuration to the startup-configuration on the system.EXEC Privilege modecopy running-config startup-config• Save the running-configuration to an FTP server.EXEC Privilege modecopy running-config ftp:// username:password@{hostip | hostname}/filepath/filename• Save the running-configuration to a TFTP server.EXEC Privilege modecopy running-config tftp://{hostip | hostname}/ filepath/filename• Save the running-configuration to an SCP server.EXEC Privilege modecopy running-config scp://{hostip | hostname}/ filepath/filenameNOTE: When copying to a server, a host name can only be used if a DNS server is configured.Configure the Overload Bit for a StartupScenarioFor information about setting the router overload bit for a specific period of time after a switch reload isimplemented, refer to the Intermediate System to Intermediate System (IS-IS) section in the Dell NetworkingOS Command Line Reference Guide.Viewing FilesYou can only view file information and content on local file systems.To view a list of files or the contents of a file, use the following commands.• View a list of files on the internal flash.EXEC Privilege modedir flash:• View the contents of a file in the internal flash.EXEC Privilege modeshow file flash://filename• View a list of files on an external flash.EXEC Privilege modedir usbflash:• View the running-configuration.EXEC Privilege modeshow running-configGetting Started 60