• Enter RIP mode.CONFIGURATION moderouter rip• Apply a configured prefix list to incoming routes. You can specify an interface.If you enter the name of a nonexistent prefix list, all routes are forwarded.CONFIG-ROUTER-RIP modedistribute-list prefix-list-name in [interface]• Apply a configured prefix list to outgoing routes. You can specify an interface or type of route.If you enter the name of a non-existent prefix list, all routes are forwarded.CONFIG-ROUTER-RIP modedistribute-list prefix-list-name out [interface | connected | static | ospf]Example of Viewing Configured Prefix Lists (ROUTER RIP mode)To view the configuration, use the show config command in ROUTER RIP mode, or the show running-config rip command in EXEC mode.Dell(conf-router_rip)#show config!router ripdistribute-list prefix juba outnetwork 10.0.0.0Dell(conf-router_rip)#router ospf 34Applying a Filter to a Prefix List (OSPF)To apply a filter to routes in open shortest path first (OSPF), use the following commands.• Enter OSPF mode.CONFIGURATION moderouter ospf• Apply a configured prefix list to incoming routes. You can specify an interface.If you enter the name of a non-existent prefix list, all routes are forwarded.CONFIG-ROUTER-OSPF modedistribute-list prefix-list-name in [interface]• Apply a configured prefix list to incoming routes. You can specify which type of routes are affected.If you enter the name of a non-existent prefix list, all routes are forwarded.CONFIG-ROUTER-OSPF modedistribute-list prefix-list-name out [connected | rip | static]Example of Viewing Configured Prefix Lists (ROUTER OSPF mode)To view the configuration, use the show config command in ROUTER OSPF mode, or the show running-config ospf command in EXEC mode.Access Control Lists (ACLs) 151
