Dell PowerConnect 55xx Systems User Guide 107FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\DellContax\sources\CxU_Switching_NetworkSecurity.fmD E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 0 / 3 0 / 1 3 - F O R P R O O F O N LY– Dest. MAC Address — Match the destination MAC address to whichpackets are addressed to this address. In addition to the DestinationMAC address, you can enter a Wildcard Mask that specifies whichbits in the source address are used for matching and which bits areignored. A wildcard of 00:00:00:00:00:00 means the bits must bematched exactly; ff:ff:ff:ff:ff:ff means the bits are irrelevant. Anycombination of 0s and ffs can be used.– Any — Check to indicate that the destination address is not matched.– VLAN ID — Match the packet’s VLAN ID to this VLAN ID. Thepossible VLAN IDs are 1 to 4095.– CoS — Match the packet’s CoS value to this CoS value.– Cos Mask — Match the packet’s CoS value to one of these CoSvalues.– Ether type — Match the packet’s Ethertype to this one.– Time Range Name — Check to associate a time range with the ACE.Select one of the time ranges defined in the Time Range page.– Action — Select the action taken upon a match. The followingoptions are available:• Permit — Forward packets that meet the ACL criteria.• Deny — Drop packets that meet the ACL criteria.• Shutdown — Drop packets that meet the ACL criteria, anddisable the port to which the packet was addressed.– Logging of Dropped Packets — Check to activate logging of droppedpackets.
