516 Dell PowerConnect 55xx Systems User GuideFILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\DellContax\sources\CxUGSwitching_LAG.fmD E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 0 / 3 0 / 1 3 - F O R P R O O F O N LYThe LACP and static LAGs on each unit are displayed along with theirmember ports.This page displays the following fields:– LACP — Aggregates the port to a LAG, using LACP.– LAG — Adds a port to a LAG, and indicates the specific LAG towhich the port belongs.2 Click Edit to change the status of a port in a LAG.3 Select the LAG.4 In the LACP row (the first row), toggle the button under the port numberto assign either the LACP or the static LAG.5 In the LAG row (the second row), toggle the button to a specific numberto aggregate or remove the port to that LAG number.Adding Ports to LAGs Using CLI CommandsThe following table summarizes the CLI commands for assigning ports toLAGs as displayed in the LAG Membership pages.The following is an example of the CLI commands:Table 15-2. LAG Membership CLI CommandsCLI Command Descriptionchannel-group LAG-numbermode {on|auto}no channel-groupAssociates a port with a port-channel with orwithout a LACP operation.Use the no form of this command to removethe channel-group configuration from theinterface.show interfaces port-channel [LAG-number]Displays port-channel information for all portchannels or for a specific port channel.console(config)# interface gi1/0/11console(config-if)# channel-group 1 mode on
