Dell PowerConnect 55xx Systems User Guide 81FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\DellContax\sources\CxUGAdvanced Configuration.fmD E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 0 / 3 0 / 1 3 - F O R P R O O F O N LYTo download software through the Startup menu:1 From the Startup menu, press [1]. The following prompt is displayed:2 When using the HyperTerminal, click Transfer on the HyperTerminalMenu Bar and select Send File.3 In the Filename field, enter the file path for the file to be downloaded.4 Ensure that the Xmodem protocol is selected in the Protocol field.5 Press Send. The software is downloaded.NOTE: After software download, the device reboots automatically.Erase FLASH File - Option[2]In some cases, the device Startup Configuration file must be erased. If theconfiguration is erased, all parameters configured via CLI, web-managementor SNMP must be reconfigured.To erase the device configuration in the Startup Configuration file:1 From the Startup menu, select [2]. The following message isdisplayed:Warning! About to erase a Flash file.Are you sure (Y/N)?2 Press Y. The following message is displayed.Write Flash file name (Up to 8 characters, Enter fornone.):3 Enter config ("config" is the standard name for the Startup configurationfile although you can use any name).The following is displayed:Downloading code using XMODEM!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!File config (if present) will be erased after systeminitialization======== Press Enter To Continue ========
