248 Dell PowerConnect 55xx Systems User GuideFILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\DellContax\sources\CxUGSystemConfig.fmD E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 0 / 3 0 / 1 3 - F O R P R O O F O N LY– IPv6 Address Type — When the server supports IPv6, this specifiesthe type of static address supported. The possible options are:• Link Local — A Link Local address that is non-routable and usedfor communication on the same network only.• Global — A globally unique IPv6 address; visible and reachablefrom different subnets.– Link Local Interface — When the server supports an IPv6 Link Localaddress, this specifies the Link Local interface. The possible optionsare:• VLAN — The VLAN on which the IPv6 interface is configured.• ISATAP — The IPv6 interface is configured on an ISATAPtunnel.• Host Name (1-160 Characters) — Enter the host name to beassociated with the IP address entered below.• IP Address — Enter the IP address of the domain. Four addresses canbe entered.4 Click Remove to delete a host name. All addresses for this host name aredeleted at the same time.Mapping IP Addresses to Domain Host Names Using the CLI CommandsThe following table summarizes the CLI commands for mapping domainhost names to IP addresses.Table 9-35. Domain Host Name CLI CommandsCLI Command Descriptionip host name address[address2 address3address4]Defines the static host name-to-address mapping inthe host cacheno ip host name Removes the name-to-address mapping.clear host {name|*} Deletes entries from the host name-to-address cache.show hosts [name] Displays the default domain name, list of name serverhosts, the static and the cached list of host names andaddresses.
