144 Dell PowerConnect 55xx Systems User GuideFILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\DellContax\sources\CxU_Switching_NetworkSecurity.fmD E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 0 / 3 0 / 1 3 - F O R P R O O F O N LYdot1x re-authenticationno dot1x re-authenticationEnables periodic re-authentication of theclient.Use the no form of this command torestore the default configuration.dot1x timeout re-authperiodsecondsno dot1x timeout supp-timeoutSets the number of seconds between re-authentication attempts.Use the no form of this command torestore the default configuration.dot1x re-authenticate[[gigabitethernet|tengigabitethernet] port-number]Manually initiates a re-authentication ofall 802.1X-enabled ports or the specified802.1X-enabled port.dot1x timeout quiet-periodsecondsno dot1x timeout quiet-periodSets the number of seconds that thedevice remains in the quiet state followinga failed authentication exchange.Use the no form of this command torestore the default configuration.dot1x timeout server-timeoutsecondsno dot1x timeout server-timeoutSets the time for the retransmission ofpackets to the authentication server.Use the no form of this command torestore the default configuration.dot1x timeout supp-timeoutsecondsno dot1x timeout supp-timeoutSets the time for the retransmission of anEAP request frame to the client.Use the no form of this command torestore the default configuration.dot1x timeout tx-periodsecondsno dot1x timeout tx-periodSets the number of seconds that thedevice waits for a response to an EAP -request/identity frame, from the client,before resending the request.Use the no form of this command torestore the default configuration.show dot1x[[gigabitethernet|tengigabitethernet] port-number]Displays 802.1X status for the device orfor the specified interface.Table 8-13. Port-Based Authentication Interface CLI Commands (Continued)CLI Command Description
