112 Dell PowerConnect 55xx Systems User GuideFILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\DellContax\sources\CxU_Switching_NetworkSecurity.fmD E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 0 / 3 0 / 1 3 - F O R P R O O F O N LY• HMP — Host Mapping Protocol (HMP). Collects networkinformation from various networks hosts. HMP monitors hostsspread over the internet as well as hosts in a single network.• RDP — Reliable Data Protocol (RDP). provide a reliable datatransport service for packet-based applications.• IDPR — Matches the packet to the IDPR protocol.• IDRP — Matches the packet to the Inter-Domain RoutingProtocol (IDRP).• RVSP — Matches the packet to the ReSerVation Protocol(RSVP).• AH — Authentication Header (AH). Provides source hostauthentication and data integrity.• EIGRP — Enhanced Interior Gateway Routing Protocol(EIGRP). Provides fast convergence, support for variable-lengthsubnet mask, and supports multiple network layer protocols.• OSPF — The Open Shortest Path First (OSPF) protocol is alink-state, hierarchical interior gateway protocol (IGP) fornetwork routing Layer Two (2) Tunneling Protocol, an extensionto the PPP protocol that enables ISPs to operate Virtual PrivateNetworks (VPNs).• IPIP — IP over IP (IPinIP). Encapsulates IP packets to createtunnels between two routers. This ensures that IPIP tunnelappears as a single interface, rather than several separateinterfaces. IPIP enables tunnel intranets occur the internet, andprovides an alternative to source routing.• PIM — Matches the packet to Protocol Independent Multicast(PIM).• L2TP — Matches the packet to Internet Protocol (L2IP).• ISIS — Intermediate System - Intermediate System (ISIS).Distributes IP routing information throughout a singleautonomous system in IP networks.– Protocol ID To Match — Enter a protocol number if you did notselect a protocol by name.– Any(IP) — Check to use any protocol.
