Dell PowerConnect 55xx Systems User Guide 409FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\DellContax\sources\CxUGSwitching_Ports.fmD E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 0 / 3 0 / 1 3 - F O R P R O O F O N LYThe following is an example of the CLI commands:show interfaces advertise Displays the interface’s negotiationadvertisement settings.show interfaces status[[gigabitethernet|tengigabitethernet] port-number|port-channelLAG-number]Displays the status for all configuredinterfaces.show interfaces description[[gigabitethernet|tengigabitethernet] port-number|port-channelLAG-number]Displays the description for allconfigured interfaces.console(config)# interface gi2/0/1console(config-if)# description "RD SW#3"console(config-if)# shutdownconsole(config-if)# no shutdownconsole(config-if)# speed 100console(config-if)# duplex fullconsole(config-if)# negotiationconsole(config-if)# back-pressureconsole(config-if)# flowcontrol onconsole(config-if)# mdix autoconsole(config-if)# endconsole# show interfaces configuration gi2/0/1Flow Admin Back MdixPort Type Duplex Speed Neg control State Pressure Mode-------- ------------ ------ ----- -------- ------- ----- -------- ----gi2/0/1 1G-Copper Full 1000 Enabled Off Up Disabled Autoconsole# show interfaces status gi2/0/1Flow Link Back MdixPort Type Duplex Speed Neg ctrl State Pressure Mode-------- ------------ ------ ----- -------- ---- ----------- -------- ----gi2/0/1 1G-Copper -- -- -- -- Down -- --Table 10-8. Port Configuration CLI Commands (Continued)CLI Command Description
