184 Dell PowerConnect 55xx Systems User GuideFILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\DellContax\sources\CxUGSystemConfig.fmD E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 0 / 3 0 / 1 3 - F O R P R O O F O N LYDefining SNTP Global Settings Using CLI CommandsThe following table summarizes the CLI commands for setting fieldsdisplayed in the SNTP Global Settings pages.The following is an example of the CLI commands:SNTP AuthenticationUse the SNTP Authentication page to enable/disable SNTP authenticationbetween the device and an SNTP server, and to set the means by which theSNTP server is authenticated.Table 9-8. SNTP Global Parameters CLI CommandsCLI Command Descriptionsntp client poll timersecondsno sntp client poll timerSets the polling time for an SNTP client.Use the no form of this command torestore the default configuration.sntp broadcast clientenableno sntp broadcast clientenableEnables SNTP Broadcast clients.Use the no form of this command todisable SNTP Broadcast clients.sntp anycast client enableno sntp anycast clientenableEnables SNTP Anycast clients.Use the no form of this command todisable SNTP Anycast clients.sntp unicast client enableno sntp unicast clientenableEnables SNTP predefined Unicast clients.Use the no form of this command todisable SNTP Unicast clients.show sntp configuration Displays SNTP configurationconsole(config)# sntp anycast client enable
