Dell PowerConnect 55xx Systems User Guide 309FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\DellContax\sources\CxUGSystemConfig.fmD E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 0 / 3 0 / 1 3 - F O R P R O O F O N LY– Client Identifier — Enter a unique identification of the clientspecified in dotted hexadecimal notation, such as: 01b6.0819.6811.72.or:– MAC Address — Enter the MAC address of DHCP static host.– Client Name — The name of the client, using a standard set of ASCIIcharacters. The client name must not include the domain name.– Default Router — Enter the default router for the DHCP client.– Domain Name Server — Enter the DNS server available to the DHCPclient.– Domain Name — Enter the domain name for a DHCP client. Thedomain name may contain up to 32 characters.– NetBIOS WINS Server — Enter the NetBIOS WINS name serveravailable to a DHCP client.– NetBIOS Node Type — Select how to resolve the NetBIOS name.Valid node types are:• Empty — Default value.• Broadcast — IP Broadcast messages are used to register andresolve NetBIOS names to IP addresses.• Peer-to-Peer — Point-to-point communications with a NetBIOSname server are used to register and resolve computer names to IPaddresses.• Mixed — A combination of b-node and p-node communicationsis used to register and resolve NetBIOS names. M-node first usesb-node; then, if necessary, p-node. M-node is typically not the bestchoice for larger networks because its preference for b-nodeBroadcasts increases network traffic.• Hybrid — A hybrid combination of b-node and p-node is used.When configured to use h-node, a computer always tries p-nodefirst and uses b-node only if p-node fails. This is the default.– SNTP Server — Enter the IP address of the time server for the DHCPclient.
