Configuring DHCPv6 Server and Relay Settings 1095console(config-dhcp6s-pool)#exit3 Configure the DHCPv6 server functionality on VLAN 200 and specify thepool to use for DHCPv6 clients.console(config)#interface vlan 200console(config-if-vlan200)#ipv6 dhcp server my-pool2 preference 20Configuring an Interface as a DHCPv6 Relay AgentThis example configures a VLAN routing interface as a DHCPv6 Relay. Thecommand defines the destination address of the relay server and the interfaceused for reachability to the relay server.To configure the switch:1 Create VLAN 300 and define its IPv6 address.console(config)#interface vlan 300console(config-if-vlan300)#ipv6 address2001:DB8:03a::/642 Configure the interface as a DHCPv6 relay agent and specify the IPv6address of the relay server. The command also specifies that the route tothe server is through the VLAN 100 routing interface.console(config-if-vlan300)#ipv6 dhcp relaydestination FE80::250:A2FF:FEBF:A056 interfacevlan 100console(config-if-vlan300)#exitconsole(config)#exit3 View the DHCPv6 configuration for VLAN 300.console#show ipv6 dhcp interface vlan 300IPv6 Interface.......................... ...Vl300Mode....................................... RelayRelay Address........... FE80::250:A2FF:FEBF:A056Relay Interface Number.................. ...Vl100Relay Remote ID.............................Option Flags................................
