156 racadm Subcommand Man Pagesw w w . d e l l . c o m | s u p p o r t . d e l l . c o mSynopsisracadm fwupdate -u [-w] [-D]racadm fwupdate -sracadm fwupdate -g [-u ] [-w][-D] [-a <IP address>][-f <path/file>]racadm fwupdate -cracadm fwupdate -p -f <update filename> [-u] [-w] [-D]DescriptionThe fwupdate subcommand allows the caller to update the firmware on the DRAC 4. The user may:• Start updating a firmware update file that has previously been loaded into the RAMdiskupdate area.• Check the status of the firmware update process.• Instruct the DRAC 4 firmware to get the firmware update file from a TFTP server and load itinto the RAMdisk area.The user may specify the IP address and path/filename or IP address and directory, or use thedefault values found in the database. The user may also specify that the update be startedafter loading, or to terminate and make a separate call to start the update process.• Load the update file into the DRAC 4 RAMdisk area.InputTable A-10 describes the fwupdate subcommand options.NOTE: The -p and -u options are not supported for the serial/telnet console.Table A-9. fwupdateSubcommand Definitionfwupdate Updates the firmware on the DRAC 4.
