Using the DRAC 4 With Microsoft® Active Directory 97To add a privilege:1 Select the Privileges Object tab and click Add.2 Type the Privilege Object name and click OK.Click the Products tab to add one or more RAC devices to the association. The associateddevices specify the RAC devices connected to the network that are available for the definedusers or user groups.NOTE: You can add multiple RAC devices to an association object.To add RAC devices or RAC device groups:1 Select the Products tab and click Add.2 Type the RAC device or RAC device group name and click OK.3 In the Properties window, click Apply and then OK.Enabling SSL on a Domain ControllerIf you plan to use Microsoft Enterprise Root CA to automatically assign all your domaincontrollers SSL certificate, you must perform the following steps to enable SSL on eachdomain controller.1 Install a Microsoft Enterprise Root CA on a Domain Controller.a Select Start → Control Panel → Add or Remove Programs.b Select Add/Remove Windows Components.c In the Windows Components Wizard, select the Certificate Services check box.d Select Enterprise root CA as CA Type and click Next.e Enter Common name for this CA, click Next, and click Finish.2 Enable SSL on each of your domain controllers by installing the SSL certificate foreach controller.a Click Start → Administrative Tools → Domain Security Policy.b Expand the Public Key Policies folder, right-click Automatic Certificate Request Settingsand click Automatic Certificate Request.c In the Automatic Certificate Request Setup Wizard, click Next and selectDomain Controller.d Click Next and click Finish.
