204 DRAC 4 Property Database Group and Object Definitionsw w w . d e l l . c o m | s u p p o r t . d e l l . c o m cfgSerialTelnet7flsBackspace (Read/Write)NOTE: To modify this property, you must have Configure DRAC 4 permission.DescriptionWhen enabled, the DRAC 4 will interpret 0x7f characters as backspaces from a telnet session.Some telnet clients send 0x7f characters when you press . Normally, when youpress , 0x08 characters are sent.Default0Legal Values0=Disabled, 1=EnabledcfgNetTuningThe group contains parameters to tune the DRAC 4 network configuration.One instance of the group is allowed. All objects in this group require a DRAC 4 reset beforethey become active. The following subsections describe the objects in this group.cfgNetTuningNicAutoneg (Read/Write)NOTE: To modify this property, you must have Configure DRAC 4 permission.Legal Values1 or 0Default1DescriptionEnables autonegotiation of physical link speed and duplex. If enabled, autonegotiation takespriority over values set in the cfgNetTuningNic100MB and cfgNetTuningNicFullDuplex objects.cfgNetTuningNic100MB (Read/Write)NOTE: To modify this property, you must have Configure DRAC 4 permission.Legal Values1 or 0
