Configuring the DRAC 4 to Use a Serial or Telnet Text Console51You can change the SSH port with the command:racadm config -g cfgRacTuning -o cfgRacTuneSshPort 0xFor more information oncfgSerialSshEnableandcfgRacTuneSshPortobjects,see"DRAC 4 Property Database Group and ObjectDefinitions."The DRAC 4 SSH implementation supports multiple cryptography schemes:•Asymmetric Cryptography:–Diffie-Hellman DSA/DSS 512-1024 (random) bits per NIST specification•Symmetric Cryptography:–AES256-CBC–RIJNDAEL256-CBC–AES192-CBC–RIJNDAEL192-CBC–AES128-CBC–RIJNDAEL128-CBC–BLOWFISH-128-CBC–3DES-192-CBC–ARCFOUR-128•Message Integrity:–HMAC-SHA1-160–HMAC-SHA1-96–HMAC-MD5-128–HMAC-MD5-96•Authentication:–Password–SSHv2 (SSHv1 is not supported)Connecting to the Managed System Through the Local SerialPort or Telnet Management Station (Client System)The managed system provides access between the DRAC 4 and the serial port on your system toenable you to power on, power off, or reset the managed system, and access logs.The serial console is available on the DRAC 4 through the managed system external serialconnector. Only one serial client system (management station) may be active at any given time.
