racadm Subcommand Man Pages 161DescriptionThe getsysinfo command returns information about watchdog status, depending on thecommand options.InputTable A-15 describes the getsysinfo subcommand options.If the -w option is not specified, then the other options are used as defaults.OutputThe following data element is output as a string:Watchdog information/recovery actionEnumeration values or bitmaps are defined for these elements. When the -A (API) option isincluded on the command, the enumeration/bit value of the element is listed in the output.Otherwise, the enumeration or bit value is mapped to a string before being output.The bulleted items listed in Table A-16 define the mapping of values to strings.Table A-15. getsysinfo Subcommand OptionsOption Description-d Displays DRAC 4 information-s Displays system information-w Displays watchdog information-A Eliminates the printing of headers/labels-r Displays DRAC 4 informationTable A-16. Watchdog Recovery Action Number DescriptionsValue DescriptionWatchdog recovery action An enumeration defines the meaning of this value:• 0 = no-action• 1 = hard-reset• 2 = power-down• 3 = power-cycle
