Group 30 — InputsMVX9000 User Manual 5-15Descriptions ofParameter Settings30.12Digital Input Terminal(DI3)Range: Default: 0500 Not Used01 External Fault (NO)02 External Fault (NC)03 External Reset (NO)04 External Reset (NC)05 Preset Speed Switch 106 Preset Speed Switch 207 Preset Speed Switch 308 Jog09 2nd Acceleration/Deceleration time selection10 Control Location — I/O terminals11 Control Location — keypad12 Control Location — communication13 Increase Master Frequency (RUN state only)14 Decrease Master Frequency (RUN state only)15 Forward / Reverse16 Parameter Lock17 Acceleration / Deceleration Inhibit18 Run Enable19 PAUSE (NO)20 PAUSE (NC)21 PID Disable22 Run PLC23 Pause PLC24 Counter input25 Counter reset26 First/Second source of Master Frequency27 Increase Master Frequency (during any state)28 Decrease Master Frequency (during any state)29 Output Shut Off (NO)30 Output Shut Off (NC)31 Auto Location — Operation & Frequency by First source(P50.01 & P50.02)32 Hand Location — Operation & Frequency by Secondsource (P50.57 & P50.60)33 LOC — Operation & Frequency by Second source(P50.57 & P50.60)30.13Digital Input Terminal(DI4)Range: See Parameter 30.12 Default: 06
