Eaton Power XL SmartWire-DT DX-NET-SWD Series Manual

Contents

3 Installation3.3 Install SmartWire-DT connection26 DX-NET-SWD... 08/14 MN04012009Z-EN www.eaton.com3.3 Install SmartWire-DT connectionThe connection of the SmartWire-DT is carried out via the 8-pin externaldevice plug SWD4-8SF2-5.Figure 19:Configuration of the SmartWire-DT flat band conductor3.3.1 Mounting of SmartWire-DT flat cableConnect the SWD external device plug SWD4-8SF2-5 with the adaptedSmartWire-DT ribbon cable.Meaning+24 V DC Contactor control voltageChassisgroundContactor control voltageGND for device supply voltage and data cableData B Data cable BData A Data cable AGND for device supply voltage and data (data A, data B)SEL Select cable for automatic addressing of theSmartWire-DTmodules+15 V DC Device supply voltageLFigure 20:Connecting the SmartWire-DT external device plug with an adapted ribbon cable(left: DX-NET-SWD3, right: DX-NET-SWD1)NOTICEDo not install the SWD4-8SF2-5 SmartWire-DT external deviceplug without switching off the supply and control voltages first!L1/L L2/N L3U V W8 910 11ReadyIOASWD4-8SF2-5+ 15VSWD4-8SF2-5+ 15VSWD4-8SF2-5SWD4-100LF8-24SWD4-3LF8-24-2SSWD4-5LF8-24-2SSWD4-10LF8-24-2S1 2SWD4-8SF2-5+ 15VSWD4-8SF2-5+ 15VSWD4-8SF2-5SWD4-100LF8-24SWD4-3LF8-24-2SSWD4-5LF8-24-2SSWD4-10LF8-24-2S12