Eaton Power XL SmartWire-DT DX-NET-SWD Series Manual

Contents

4 Commissioning4.5 Acyclic dataDX-NET-SWD... 08/14 MN04012009Z-EN www.eaton.com 494.5.3 List of parametersTable 15 below lists all the parameters that must be processed acyclically viaSmartWire-DT.The abbreviations and acronyms used in the overview are defined below:The "Parameter number in specific device" column is subdivided into threesub-columns, one for each PowerXL device (DA1, DC1, DE1).• When there is a parameter number in the sub-column for a device, thismeans that the parameter is available on that device. The parameter willhave the exact same function on all device types.• A checkmark ( ✓ ) means that the corresponding parameter is availableon the device but has no parameter number.• A minus sign ( – ) means that the parameter is not available on thedevice.Abbreviation MeaningPNU Parameter number; parameter designation used by the drivesConnect parameter software andthe external DX-KEY-LED keypad's display.PNU Subindex Parameter number subindexRUN Access rights to the parameters during operation (RUN)STOP The parameter can only be accessed in STOP modero/rw Parameter read and write permissions:ro = read onlyrw = read and writeName Short parameter nameValue • Setting value of the parameter• value range• Display valueDS Default setting (the parameter's value when using the device's factory settings)The values in parentheses are the default settings when using a frequency of 60 Hz.￫ For more detailed information on the individual parameters,please refer to the manuals for the corresponding basic devices:• DA1 variable frequency drive: MN04020005Z-EN• DC1 variable frequency drive: MN04020003Z-EN• DE1 variable speed starter: MN040011EN