Eaton Power XL SmartWire-DT DX-NET-SWD Series Manual

Contents

4 Commissioning4.3 ProgrammingDX-NET-SWD... 08/14 MN04012009Z-EN www.eaton.com 314.3 Programming4.3.1 IntroductionCyclic and acyclic data as well as diagnostic data can be transferred via theSmartWire-DT system. The number of cyclic data is variable and is definedwith the aid of profiles.The cyclical and acyclical data used by PowerXL variable frequency drivershas been designed in such a way as to match the following profiles and meetthe following standards:• the standard specified by SmartWire-DT,• The PROFIdrive profileThe appropriate profile can be selected by the user.4.3.2 State diagramsThe state diagrams used below correspond to PROFIdrive profile 4.1 and areadapted in line with the relevant profiles.The grey boxes in the figures represent the current state (S = State) with thehelp of the input bytes. The white boxes represent the transition conditionswith the help of the relevant output byte bits.Dots are used to indicate priority levels. The more dots a transition has, thehigher its priority.State diagrams are displayed in the following. The images indicate thefollowing states:￫ For the available parameter numbers (PNU)￫ Section 4.5, “Acyclic data“Variable frequency drive/variablespeed starter stateCommand (input) issued to variablefrequency drive/variable speed starter