Eaton Power XL SmartWire-DT DX-NET-SWD Series Manual

Contents

4 Commissioning4.5 Acyclic data84 DX-NET-SWD... 08/14 MN04012009Z-EN www.eaton.com4.5.6.4 SmartWire-DT write response(-) – ErrorThis section shows the various possible device-specific errors that can occurduring communications via the acyclic parameter channel with PROFIBUS-DP.The following table describes the various possible errors that can becontained in the SmartWire-DT write response(-).In the case of XSoft-CoDeSys, only failure code 54dec (representing theerrors listed above) can be output via function blocks XDPMV1_READ andXDPMV1_WRITE when using a PROFIBUS-DP master.4.5.6.5 SmartWire-DT read response(-) – ErrorThis section shows the various possible device-specific errors that can occurduring communications via the acyclic parameter channel with PROFIBUS-DP.The following table describes the various possible errors that can becontained in the SmartWire-DT read response(-).In the case of XSoft-CoDeSys, only failure code 54dec (representing theerrors listed above) can be output via function blocks XDPMV1_READ andXDPMV1_WRITE when using a PROFIBUS-DP master.Error Type Failure code DescriptionError_Code_1 A1hex Write error: Only reading allowed for indexes 1 – 3 (PKE motor-protectivecircuit-breaker).Error_Code_1 A2hex DC1 variable frequency drive is not available.Error_Code_1 B0hex There is no valid index.Error_Code_1 B1hex Parameter request block too long.Error_Code_1 B5hex Parameter access temporarily not permissible due to internal processes.￫ For more information, see ￫ Section 4.5.4.2, “Protocol“,page 76.Error Type Failure code DescriptionError_Code_1 A1hex Write error: Only reading allowed for indexes 1 – 3 (PKE motor-protectivecircuit-breaker).Error_Code_1 A2hex DC1 variable frequency drive is not available.Error_Code_1 B0hex There is no valid index.Error_Code_1 B5hex Parameter access temporarily not permissible due to internal processes￫ For more information, see ￫ Section 4.5.4.2, “Protocol“,page 76.￫ For more information on the subject of transferring acyclicaldata, please consult manual MN05013002Z-EN, “SmartWire-DTGateways”.