S611 Soft StarterS611 Soft Starter MN03902011E—May 2012 www.eaton.com ixCAUTIONIf the AUTO Reset mode setting is used with level sensing,CAUTION must be exercised to assure that any restartoccurs in a safe manner. Motor restart may occurimmediately and unexpectedly after any fault condition hascleared.CAUTIONIn the AUTO Reset mode, CAUTION must be exercised toassure that any restart occurs in a safe manner.WARNINGMake sure you read and understand the procedures inthis manual before you attempt to set up or operate theequipment.WARNINGDo not work on energized equipment unless absolutelyrequired. If the troubleshooting procedure requiresequipment to be energized, all work must be performedby properly qualified personnel, following appropriatesafety practices and precautionary measures.WARNINGSetting the Overload Trip Class parameter to OFFdisables this feature resulting in no thermal overloadprotection for the motor.WARNINGOnly apply 24 Vdc to the communication modulefieldbus connection. Use of any other voltage may resultin personal injury, property damage and damage to themodule.www.comoso.com
