S611 Soft Starter MN03902011E—May 2012 www.eaton.com 69Modbus Map, continuedModbusCoil NumberModbusRegister Number R/W DCI Descriptor Notes— 324 R DCI_TRIP_REASON —5169 — R Overload —5170 — R Jam —5171 — R Stall —5172 — R Imbalance —5173 — R Load Disconnect —5174 — R Phase Loss —5175 — R Mains Fault —5176 — R Phase Reversal —5177 — R Shorted SCR —5178 — R SCR Not Firing —5179 — R Pole Overtemp —5180 — R Bypass Dropout —5181 — R SCR Overcurrent —5182 — R Contactor Overcurrent —5183 — R Communication Fault —5184 — R Device Fault —— 325 R DCI_FAULT_QUEUE 1 —— 326 R DCI_FAULT_QUEUE 2 —— 327 R DCI_FAULT_QUEUE 3 —— 328 R DCI_FAULT_QUEUE 4 —— 329 R DCI_FAULT_QUEUE 5 —— 330 R DCI_FAULT_QUEUE 6 —— 331 R DCI_FAULT_QUEUE 7 —— 332 R DCI_FAULT_QUEUE 8 —— 333 R DCI_FAULT_QUEUE 9 —— 334 R DCI_FAULT_QUEUE 10 —— 335 R DCI_DSP_FIRMWARE_VERSION —— 336 R DCI_DSP_FIRMWARE_BUILD_NUMBER —— 337 R DCI_PIC_FIRMWARE_VERSION —— 338 R DCI_UNIT_ID —— 400 R/W DCI_MOTOR_CONTROL —6385 — — Run —6386 — — — —6387 — — Permissive —6388 — — Reset —6389 — — — —— 401 R/W DCI_START_CONTROL_EDGE_LEVEL 0 = Edge1 = Level (1)www.comoso.com
