RESTRICTED USE ONLY Fargo Electronics, Inc.HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1) 6-5Network Management InterfaceThe SNMP interface is described below.Interface DescriptionSNMP • The Ethernet interface is a fully-manageable SNMP agent that supportsMIB-II.• The Ethernet interface is MIB II compliant, allowing SNMP managers tomonitor protocol, network and routing statistics.Telnet Command Line InterfaceInitiating a Telnet SessionThis procedure shows how to initiate a Telnet session from a PC in order to access theTelnet services provided by the Printer.DescriptionInitiating aTelnetsessionFollow these instructions to issue Telnet commands.1. Identify the IP address of your Printer. (Note: See Switching to theAutomatic IP Address Mode.)2. Initiate a Telnet session from a DOS window on your PC. At the DOSprompt, enter telnet [IP Address]• Example: C:\>telnet 192.168.11.12• All Telnet responses from the Printer will then be displayed in theTelnet session on the PC.• All commands entered will be sent to the Telnet client in thePrinter.3. Enter “help” or “?” to get an on-window list of supported Telnetcommands.
