RESTRICTED USE ONLY Fargo Electronics, Inc.HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1) 10-29Section 10: CleaningThe Cleaning Kit part number for this Printer is 089200. For more detailed instruction, pleaserefer to the Cleaning Kit Instruction Sheet in the kit.Important: The Printer should be cleaned on a regular basis to ensure that the Printerconsistently produces high quality output.Danger: Be sure to disconnect the Printer's power cord whenever performing anytype of maintenance procedure unless otherwise directed.Important: Card Printers require highly specialized Print Ribbons to function properly. Tomaximize Printer life, reliability, printed card quality and durability, you must use onlyCertified Supplies. For this reason, your Fargo warranty is void, where not prohibited by law,if you use non-Certified Supplies. To order additional materials, please contact yourauthorized reseller.Using the Required SuppliesFor the maintenance procedures outlined for the Printer, you will need a Printer Cleaning Kit,available from the reseller. This optional kit includes the following:• Printhead Cleaning Swabs pre-moistened with 99.99% isopropyl alcohol for cleaningthe Printer's Printhead.• Cleaning Cards with an adhesive backing for cleaning the Printer's Cleaning Rollers.• Gauze Pads pre-moistened with 99.99% isopropyl alcohol for cleaning the Printer'sinterior and exterior.• Alcohol Cards pre-moistened with 99.99% isopropyl alcohol for cleaning the Printer'sPlaten Rollers, Card Feed Rollers.Caution: As with any electronic device, internal components of the Printer, suchas the Printhead, may be damaged if exposed to static electrical discharges. To avoidpotential damage, always wear an appropriate personal grounding device, such as a wriststrap (with integral resistor) connected to an ESD ground. At a minimum, make positivecontact with the bare metal chassis of the Printer with the hand prior to touching any internalelectrical components.
