RESTRICTED USE ONLY Fargo Electronics, Inc.HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1) 7-10Setting Up the Printer DriverOnce the appropriate Printer Driver for the computer has been installed, you will need to setthe Driver up with the proper print options. To open the Printer Driver setup window, pleaserefer to the following steps for the specific operating system:Setting up Windows 2000/XP/2003Step Procedure1 Click the Start button, point to Settings and select Printers.2 Click on the icon with the right mouse button.Select Printing Preferences... if using Windows 2000/XP/2003.• If you would like to permanently save the Printer Driver settings so you willnot need to change them again, do so through the main Printer Driversetup window described above.• Although most applications do allow you to change these same PrinterDriver options from their own Print screens, the settings may not bepermanently saved.3 To change or verify the appropriate Printer Driver options for the print job,please refer to the topics describing each of the Printer Driver's tabs.Using the OK, Cancel and Help buttonsHere are the descriptions:• OK button: Closes dialog box and saves Driver configuration changes that haveoccurred since Driver dialog box has been opened.• Cancel button: Closes dialog box and cancels Driver configuration changes that haveoccurred since Driver dialog box has been opened.• Help button: Launches Help indexed to help for the corresponding active tab.• Apply button: Not active for the user.
