RESTRICTED USE ONLY Fargo Electronics, Inc.HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1) 7-83Using the Click and Drag capabilityClick and drag the corners and the sides of an area to change size and location of area.• The Horizontal, Vertical size and X, Y coordinates update accordingly.Click and drag the area to change the location.• The X, Y coordinates update accordingly.Selecting “inches or mm” radio buttonSelect from the inches or mm radio button to change the measurement type. (Note: This issimilar to the choice on the Card tab.)• The inches radio button displays the area size and the location in inches.• The mm radio button displays the area size and the location in mm.Using the Add and Delete buttonsStep Procedure1 Use the Add button for these capabilities:• Add an area default sized to .2 (.2 at location “0” with focus on the addedarea).• Add multiple areas in the same location with the same affect (as if therewere only one area). (Note: Intersecting/overlapping areas do notcancel each other out; instead, they act as one area.)2 Using the Delete button to delete the area with focus from the graphic.
