RESTRICTED USE ONLY Fargo Electronics, Inc.HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1) 7-3Selecting the Appropriate Printer Driver settingsYou have these card selections (to choose from):• Fargo UltraCard III (Default Card Type)• Fargo Ultracard• HID ISO Prox – Standard (13xx)• HID ISO Prox – Composite (15xx)• HID Identity – Standard (IDx20A)• HID Identity – Composite (HTx20E)• HID iCLASS – Standard (20xx)• HID iCLASS – Composite (21xx)• HID FlexSmart –Standard (14x0)• HID FlexSmart –Composite (14x6)• HID FlexSmart Prox – Std (14x1)• HID FlexSmart Prox – Comp (14x7)• Indala FlexISO – Standard (FPISO)• Indala FLexISO XT-Composite (FPIXT)• Custom 1• Custom 2In addition, you have these selections (to choose from):• Defaults: The Printer Driver software has default Transfer Temperature and Dwell Timesettings that deliver the best transfer for these card types. These defaults automaticallyconfigure based on the card type, Ribbon type and whether printing single- or dual-sided.• Card Type Selection: Before printing, if using these standard Fargo card types, checkto make sure that the appropriate card type option selected from the Card tab of thePrinter Driver:• Proper Settings: It is very important to note that not all card types will beaccommodated by these default settings. In some cases, experimentation may beneeded to find the proper settings.
