RESTRICTED USE ONLY Fargo Electronics, Inc.HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1) 2-24Printer Components: Transfer RollerDanger: The Printer’s Transfer Roller can reach temperatures exceeding 350degree F (175 C). Use extreme caution when operating the Transfer Roller. Never touch theTransfer Roller unless the Printer Power has been turned off for at least 20 to 30 minutes.Type DescriptionControls Both the Printer itself and the Printer’s software Driver control thebuilt-in Transfer Roller.TemperatureAdjustmentTo change the temperature of the Transfer Roller, adjust itstemperature through the Image Transfer Tab within the Printer Driversetup window.Once adjusted, the new temperature settings will be sent down withthe next print job, along with the rest of the Printer Driver information.NewTemperatureSettingBefore printing begins, the Transfer Roller will automatically adjustitself to the new temperature setting. (Note: This new temperaturesetting will remain programmed within the Printer until it is once againchanged within the Printer Driver or until the Printer is turned OFF.)Whenever the Printer is turned OFF, the Transfer Roller willautomatically reset itself and return to its default temperature the nexttime the Printer is turned ON.Disconnect the Printer's power supply. (Technician Note: Cyclingthe Printer’s power supply serves to reset the Transfer Roller to itsdefault temperature. The temperature setting within the Printer Driver,however, will stay the same until it is changed.)
