CHAPTER 5: SETTINGS PRODUCT SETUPB30 BUS DIFFERENTIAL SYSTEM – INSTRUCTION MANUAL 5-215The menu is shown on the front panel upon successful login of the Administrator role.The LOGIN setting in this menu is similar to that described in SETTINGS > PRODUCT SETUP > SECURITY except for the factoryrole.Passwords are stored in text format. No encryption is applied.Session settingsSETTINGS PRODUCT SETUP SECURITY SESSION SETTINGSSESSION LOCKOUT — This setting specifies the number of failed authentications before the device blocks subsequentauthentication attempts for the lockout period. A value of zero means lockout is disabled.SESSION LOCKOUT PERIOD — This setting specifies the period of time in minutes of a lockout period. A value of 0 means thatthere is no lockout period.Restore defaultsSETTINGS PRODUCT SETUP SECURITY RESTORE DEFAULTSLOAD FACTORY DEFAULTS — This setting is used to reset all the settings, communication, and security passwords. AnAdministrator role is used to change this setting and a Supervisor role (if not disabled) approves it.SupervisorySETTINGS PRODUCT SETUP SECURITY SUPERVISORY NEW PASSWORD: Range: 20 alphanumeric characters CONFIRM PASSWORD: Range: 20 alphanumeric charactersIn Device authentication mode, the Observer role does not have a password associated with it. In Serverauthentication mode the Observer role requires a password.If you are locked out of the software, contact GE Grid Solutions for the default password. When using CyberSentry,the default password is "ChangeMe1#".Once the passwords are set, the Administrator with Supervisor approval can change the role-associated password.In CyberSentry, password encryption is not supported. SESSION SETTINGS SESSION LOCKOUT:3Range: 0 to 99 SESSION LOCKOUTPERIOD: 3 minRange: 0 to 9999 minutes RESTORE DEFAULTS LOAD FACTORYDEFAULTS: NoRange: Yes, No SUPERVISORY DEVICEAUTHENTICATION: YesRange: Yes, No BYPASS ACCESS:DisabledRange: Local, Remote, Local and Remote, Disabled,Pushbuttons LOCK RELAY:DisabledRange: Enabled, Disabled FACTORY SERVICEMODE: DisabledRange: Enabled, Disabled SELF TESTSSee below
