CHAPTER 6: ACTUAL VALUES STATUSB30 BUS DIFFERENTIAL SYSTEM – INSTRUCTION MANUAL 6-566.3.3 RxGOOSE boolean inputsACTUAL VALUES STATUS RxGOOSE BOOLEANS6.3.4 RxGOOSE DPS inputsACTUAL VALUES STATUS RxGOOSE DPS6.3.5 Teleprotection inputsACTUAL VALUES STATUS TELEPROTECTION INPUTSThe present state of teleprotection inputs from communication channels 1 and 2 are shown here. The state displayed isthat of corresponding remote output unless the channel is declared failed.6.3.6 Contact outputsACTUAL VALUES STATUS CONTACT OUTPUTS RxGOOSE BOOLEANS RxGOOSE BOOLEAN 1STATUS: OffRange: On, Off RxGOOSE BOOLEAN 256STATUS: OffRange: On, OffThe B30 is provided with optional IEC 61850 capability. This feature is specified as a software option at the timeof ordering. See the Order Codes section of chapter 2 for details. RxGOOSE DPS RxGOOSE DPS 1Status: IntermediateRange: On, Off, Intermediate, Bad RxGOOSE DPS 16Status: IntermediateRange: On, Off, Intermediate, BadThe B30 is provided with optional IEC 61850 capability. This feature is specified as a software option at the timeof ordering. See the Order Codes section of chapter 2 for details. TELEPROTECTION INPUTS TELEPROTECTIONINPUT 1-1: OffRange: On, Off TELEPROTECTIONINPUT 1-16: OffRange: On, Off TELEPROTECTIONINPUT 2-1: OffRange: On, Off TELEPROTECTIONINPUT 2-16: OffRange: On, Off CONTACT OUTPUTS Cont Op 1OffRange: On, Off, VOff, VOn, IOn, IOff