6-22 B30 BUS DIFFERENTIAL SYSTEM – INSTRUCTION MANUALRECORDS CHAPTER 6: ACTUAL VALUES66.4.6 RxGOOSE analogsACTUAL VALUES METERING RxGOOSE AnalogsThe RxGOOSE Analog values display in this menu. The RxGOOSE Analog values are received via IEC 61850 GOOSEmessages sent from other devices.6.4.7 Transducer inputs and outputsACTUAL VALUES METERING TRANSDUCER I/O DCMA INPUTS DCMA INPUT xxActual values for each DCmA input channel that is enabled are displayed with the top line as the programmed channel IDand the bottom line as the value followed by the programmed units.ACTUAL VALUES METERING TRANSDUCER I/O RTD INPUTS RTD INPUT xxActual values for each RTD input channel that is enabled are displayed with the top line as the programmed channel IDand the bottom line as the value.6.5 Records6.5.1 User-programmable fault reportsACTUAL VALUES RECORDS USER-PROGRAMMABLE FAULT REPORTSSOURCE CURRENT IBASE = maximum nominal primary RMS value of the +IN and –IN inputsSOURCE ENERGY(Positive and Negative Watthours,Positive and Negative Varhours)EBASE = 10000 MWh or MVAh, respectivelySOURCE POWER P BASE = maximum value of VBASE × IBASE for the +IN and –IN inputsSOURCE VOLTAGE VBASE = maximum nominal primary RMS value of the +IN and –IN inputs RxGOOSE Analogs RxGOOSE Analog 10.000 RxGOOSE Analog 320.000The B30 is provided with optional GOOSE communications capability. This feature is specified as a softwareoption at the time of ordering. See the Order Codes section of chapter 2 for details. DCMA INPUT xx DCMA INPUT xx0.000 mA RTD INPUT xx RTD INPUT xx-50 °C USER-PROGRAMMABLE FAULT REPORTS NEWEST RECORDNUMBER: 0 LAST CLEARED DATE:2002/8/11 14:23:57 LAST REPORT DATE:2002/10/09 08:25:27Base unit Description
