APPENDIX D: MISCELLANEOUS REVISION HISTORYB30 BUS DIFFERENTIAL SYSTEM – INSTRUCTION MANUAL D-3DTable D-2: Major changes for B30 manual version AF2 (English)Table D-3: Major changes for B30 manual version AF1 (English)Table D-4: Major changes for B30 manual version AE3 (English)Table D-5: Major changes for B30 manual version AE1 (English)Page Description--- General revision--- Added type W CPU module to order codes in chapter 2, installation chapter 3, Replace Front Panel section in chapter 10--- Added Japanese and Polish languages and modules 6W and 6X to order codes in chapter 2. Module 6W allows 30 contactinputs, and Module 6X allows 18 outputs.3-17 Added contact input and contact output modules 6W and 6X to Table 3-3 Contact Input and Output Module Assignments andto Figure 3-17 Contact Input and Output Module Wiring (Sheet 3 of 3)5-253 Updated Thermal Overload Protection Logic diagramPage Description--- General revision--- Updated "faceplate" to "front panel" for consistency and to reflect web site--- Added graphical front panel option to order codes and specifications in chapter 2, Interfaces chapter 4, Settings chapter 5,Actual Values chapter 6--- Added PEAP-GTC and PAP protocols for authenticating user logins when using a RADIUS server. Added to Settings > ProductSetup > Security > RADIUS Authentication Method and to Modbus memory map and F codes.--- Updated Contact Inputs from 96 to 120 and Contact Outputs from 64 to 72 in Product Description in chapter 2 and FlexLogicoperands table in chapter 5--- Updated Breaker Restrike number from 6 to 3 in specifications, FlexLogic operands table, settings, features per product table,Modbus memory map3-36 Updated RS422 and Fiber Interface Connection figure for the clock channels (from 7a and 7b to 1a and 1b)3-67 Added Connect to a D400 Gateway section4-43 Updated LED Labelling instructions for the new Front Panel Label Designer4-50 Added Standard Front Panel section for labelling LEDs and pushbuttons5-106 Added USB Port section to enable/disable the USB port on the graphical front panel5-120 Updated User-programmable Pushbuttons section as per specifications5-148 Updated Disconnect Switches section as per specifications10-5 Added Convert Device Settings section10-7 Added Copy Settings to Other Device section10-15 Added Replace Front Panel section for retrofit with the new graphical front panelPage Description--- General revision2- Updated order codes10-5 Added Copy Settings to Other Device sectionPage Description--- General revision--- Added routable GOOSE content in chapters 2 and 53-36 Updated RS422 and Fiber Interface Connection figure for the clock channels (from 7a and 7b to 1a and 1b)4- Added Engineer content5- Updated IEC 61850 contentA- Updated FlexAnalog table for most UR products
